The most common reason a washer won't spin is because it's unbalanced. Finally, check your drain hose installation, and if you have a front-loading washer, clean your pump filter. You can read more about washer spin issues here: http://www.samsung.com/us/support/tro

Herein, what causes a Samsung washer not to spin?

Suspension – If your top loading Samsung washing machine getting UE or dC error code, it means there is an issue with the “Unbalanced Load” and the washer drum unable to spin. This is sometimes caused when you have a large load in your washer that exceeds the limit.

Likewise, what would cause a washer not to spin? If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. 1 Check the washing machine's spin cycle. If this works, the motor is operating and the belt is not broken. If the spin cycle doesn't work, the belt may be loose or broken.

Secondly, how do I force my Samsung washer to spin?

1 Press the Power button on your washing machine. 2 Press and hold the Spin button for 2 seconds. 3 The spin time will be displayed on the display panel. 4 Change the spin level independently of any other settings by pressing the Spin button repeatedly until a desired spin level is selected (Ex.

How do you troubleshoot a Samsung washing machine?

SAMSUNG WASHER FIX/SOLUTION:

Check the fuse or reset the circuit breaker.

Straighten the drain hoses.

Eliminate kinked hoses.

If there is a drain restriction, troubleshoot it.

Close the door and press the Start/Pause button.

For your safety, your washer will not tumble or spin unless the door is closed.

Why is my washer not spinning all the water out of my clothes?

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing.

Why does my washer say UE?

Your appliance will display a UE code when it has detected an unbalanced load and has stopped the spin for safety reasons. With any washing machine, it is vital to ensure that the load is evenly balanced when using a spin cycle. Redistribute washing by adding or removing items to ensure a more balanced load.

How do I reset my Samsung washing machine?

Turn the washing machine off and then on again.

Hold down the Temp. and Delay End (+) buttons simultaneously for 3 seconds. CB or CLB will appear on the display.

Press the Start/Pause button to begin Calibration Mode.

What does DC stand for on a Samsung washing machine?

A dc error code on your Samsung front-load washer means the washer won't spin because the load is unbalanced.

ncG1vNJzZmiemaOxorrYmqWsr5Wne6S7zGiuobFdmbalecyyZKyZnajCr7OMsJisoJWnerTAzqlkrKiZo7uqusY%3D